Announcement

Collapse
No announcement yet.

Multi-viewers A and B

Collapse
X
  • Filter
  • Time
  • Show
Clear All
new posts

  • Multi-viewers A and B

    Help me understand the function of A&B. We have two Multi-viewers out and each has an A & B side. Whatever my source is on A is also on B, and from what I think I under stand it has to be and cant be different. So what do I use the B side for? I wanted to use the B side to give me more sources because I can only have ten at the most on a grid.

  • #2
    On the Vision MVs there are 10 Buses that go to the Card and then you have 2 Output heads that can access any of the 10 Buses but have independent configurations of layouts.

    Comment


    • #3
      So, if I understand the the "B" side with a different grid has to have the same 10 buses as "A" just a different grid?

      Comment


      • #4
        Correct -- There are 10 Buses into the FPGA. Then you have 2 Output Heads. Each can have different layouts with access to those 10.

        Comment


        • #5
          Thanks much !

          Comment

          Working...
          X